Draper - 121062 KIT

Description/Specs

Draper 121062 - DRAPER RF WIRELESS REMOTE SYS (121098)

The Draper Wireless Remote Transmitter/Receiver (RF Type) - Hand-held transmitter. 3-button control lets you change direction or adjust format at any point. Receiver plugs into the Draper low-voltage control unit, and must be ordered with it.

The WRT/R is a package consisting of a receiver and hand-held transmitter which control an LVC III (low voltage control module) via radio frequency. Its range with fresh batteries is approx. 75 feet.

The transmitter is approx. 2-3/8 x 3-3/4 x 7/8" thick, and includes a removable belt clip. Operates on one 9-volt battery (included).

The receiver is approx. 6-7/8 x 4-7/8 x 1-1/2", with a wire antenna approx. 8" long, and a 6' long, 4-conductor modular cable, which plugs into a telephone-type socket on the LVC III.

Reviews

Q and A

Compatiblity - Posted by: Kent on 11/12/2012 Is this remote compatible with the Draper 116016 ELEC 69"x92' TARGA MATW? RE: Compatiblity - Posted by: Jeff Knighten on 11/13/2012 Kent, you will need the Low Voltage Control Module LVC-III 121056 to go with the screen and the 131062 kit.

Draper remote - Posted by: Stan on 3/15/2011 Can the Draper Remote Kits be used with other brands of screens? RE: Draper remote - Posted by: Dory Hornsby on 3/16/2011 It depends, to use Draper remote kits you will have to have a low voltage controller on your existing screen to tie into the screen and the remote for it to work. If your screen is wired with high voltage then no would you not be able to use those.