Description/Specs
Shure MX418D/C - Cardioid 18" Desktop Gooseneck Condenser Microphone, Attached 10´ XLR Cable, Logic Functions, Programmable Switch and LED Indicator, Attached Desktop Base
Microflex
Standard Gooseneck microphones bring a whole new meaning to the word
flexible with their fully adjustable gooseneck. Designed for easy
replacement and available in cardioid, supercardioid and
omnidirectional polar patterns, the interchangeable cartridges offer
wide frequency response and accurate sound reproduction for a wide
variety of applications, such as houses of worship, courtrooms and
conference centers. Plus, the condenser cartridges fit every model in
the Microflex product line for enhanced convenience and consistent
sound.
Microflex Gooseneck microphones are available in four models with a
variety of heights and mounting styles to choose from. One model
includes a silent mute switch with LED indicator, a Shure Microflex
exclusive. And every Microflex Gooseneck features high sensitivity and
balanced, transformerless output for maximum resistance to
electromagnetic hum and RF interference, even over long cable runs.
The polar pattern of the cartridge is indicated by the model number suffix:
C = Cardioid, S = Supercardioid, N = No Cartridge
| Gooseneck Microphones |
|
MX412/C
MX412/S
MC412/N
|
304.8 mm (12 in.) gooseneck |
Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen |
|
MX418/C
MX418/S
MX418/C
|
457.2 mm (18 in.) gooseneck |
Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen |
|
MX412S/C
MX412S/S
MX412S/N
|
304.8 mm (12 in.) gooseneck |
Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator |
|
MX418S/C
MX418S/S
MX418S/N
|
457.2 mm (18 in.) gooseneck |
Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator |
|
MX412SE/C
MX418SE/
MX418SE/N
|
304.8 mm (12 in.) gooseneck |
In-Line Preamp, Shock Mount, Flange Mount, 10-ft Side-Exit (or Bottom-Exit) Cable, Snap-Fit Foam Windscreen |
|
MX418SE/C
MX418SE/S
MX418SE/N
|
457.2 mm (18 in.) gooseneck |
In-Line Preamp, Shock Mount, Flange Mount, 10-ft Side-Exit (or Bottom-Exit) Cable, Snap-Fit Foam Windscreen |
| Desktop Gooseneck Microphones |
|
MX412D/C
MX412D/S
MX412D/N
|
304.8 mm (12 in.) gooseneck |
Desktop Base with 10 foot Cable, Logic Functions, Programmable Switch and LED Indicator, Snap-Fit Foam Windscreen |
|
MX418D/C
MX418D/S
MX418D/D
|
457.2 mm (18 in.) gooseneck |
Desktop Base with 10 foot Cable, Logic Functions, Programmable Switch and LED Indicator, Snap-Fit Foam Windscreen |
-
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to noise over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
- Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
- New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
- Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently
securing the microphone to a lectern, pulpit, or conference table
(MX412SE/MX418SE)
Frequency Response
50 to 17,000 Hz
Output Impedance
180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*)
Cardioid: -35.0 dBV/Pa (17.8 mV)
Supercardioid: -33.5 dBV/Pa (21.1 mV)
Omnidirectional: -27.5 dBV/Pa (42.2 mV)
All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted)
Cardioid: 28.0 dB SPL
Supercardioid: 26.5 dB SPL
Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)
Cardioid: 66.0 dB
Supercardioid: 67.5 dB
Omnidirectional: 73.5 dB
Dynamic Range at 1 k ohm load
96.2 dB
100 dB at 0 gain
Common Mode Rejection
45.0 dB minimum
Preamplifier Output Clipping Level (1% THD)
-6.0 dBV (0.5 V)
-12 dBV at 0 gain
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements
11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements
Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
Relative Humidity: 0 to 95%
Dimensions
See User Guide.