Description/Specs
The Electro-Voice ZX3-90PIW is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 90x50° coverage angle, for wider coverage or shorter distances. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil.
The ZX3-90PIW cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker.
This speaker has water-resistant powder coated stainless steel grilles and waterproof glandnut input panels with SJO cable.
- 2-way 600-watt suspension P.A. speaker with 90x50° coverage for wider coverage or shorter distances
- High output, 131dB SPL capacity
- Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor
- 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil
- Rugged, high-tech polypropylene enclosure
- 3 suspension Anchor Plates, 10 M8 insert suspension points
| Active or Passive |
Passive |
| Frequency Response |
-10dB:48-20,000Hz |
| Power Capacity |
600W |
| Maximum Sound Pressure Level (SPL) |
131dB |
| Nominal Sensitivity |
97dB |
| Impedance |
8 Ohms |
| Crossover |
2KHz |
| Low Frequency Driver |
DVX3121, 12" (305mm) Driver |
| High Frequency Driver |
ND2, 1" (25.4mm) exit Neodymium |
| Enclosure Material |
Polypropylene Structural Foam |
| Input Connections |
Glandnut SJO cable |
| Mounting Options |
Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure |
| Dimensions |
24.14 x 15.64 x 14.26" (613 x 397 x 362mm) |
| Weight |
43.7 lbs (19.8 kg) |
Accessory Successfully Added to Cart
Pricing and Availability are subject to change.
