AMT - Wi5

 

AMT - Wi-5 - Wireless Transmitter with Microphone

 

Description/Specs

  • Microphone hand crafted in the USA. 
  • With the provided "Universal Clamp" the AMT Wi5 is able to be used with over 40  instruments.  The Wi5's special element allows for pure sound reproduction of many different instruments.
  • Comes complete with AMT’s “iso-ring” technology and "Universal Clamp" mounting system.
  • Operating in UHF band frequency with synthesizer controlled.
  • The wireless microphone system with 16 selectable frequencies via Phase Locked Loop (PLL) circuitry makes it easy to choose non-interfered channels.
  • The Wi5 Transmitter has been specifically designed for Wind Instruments.
  • Super high sensitivity, extremely low noise transmission and reception.
  • SMT assembled PCB module ensures the quality and stability.
  • USA and European frequencies available.  European frequencies sold in Europe only.  The UK requires european frequencies.
  • Australian, UK, & Euro power adapters available.
  • AMT cardioid condenser microphone element.
  • Light weight aviation aluminum.
  • Flexable gooseneck.

AMT Wi 5 Specificatons

Carrier Frequency Range UHF band
Modulation FM
RF Power Output 10mW (max.)
Oscillation Mode PLL synthesized, 16Channel selectable
Frequency Stability 0.005%
Maximum Deviation 48KHz with limiting compressor
Spurious Emission 60dB below carrier frequency
T.H.D. 1% (at 1KHz)
Tone Signal 32.768KHz
Battery  1 x 1.5V AAA size batteries or 1 x 1.2V AAA  rechargeaable.
Current consumption 130mA at 1.5V 

  • Microphone hand crafted in the USA. 
  • With the provided "Universal Clamp" the AMT Wi5 is able to be used with over 40  instruments.  The Wi5's special element allows for pure sound reproduction of many different instruments.
  • Comes complete with AMT’s “iso-ring” technology and "Universal Clamp" mounting system.
  • Operating in UHF band frequency with synthesizer controlled.
  • The wireless microphone system with 16 selectable frequencies via Phase Locked Loop (PLL) circuitry makes it easy to choose non-interfered channels.
  • The Wi5 Transmitter has been specifically designed for Wind Instruments.
  • Super high sensitivity, extremely low noise transmission and reception.
  • SMT assembled PCB module ensures the quality and stability.
  • USA and European frequencies available.  European frequencies sold in Europe only.  The UK requires european frequencies.
  • Australian, UK, & Euro power adapters available.
  • AMT cardioid condenser microphone element.
  • Light weight aviation aluminum.
  • Flexable gooseneck.

AMT Wi 5 Specificatons

Carrier Frequency Range UHF band
Modulation FM
RF Power Output 10mW (max.)
Oscillation Mode PLL synthesized, 16Channel selectable
Frequency Stability 0.005%
Maximum Deviation 48KHz with limiting compressor
Spurious Emission 60dB below carrier frequency
T.H.D. 1% (at 1KHz)
Tone Signal 32.768KHz
Battery  1 x 1.5V AAA size batteries or 1 x 1.2V AAA  rechargeaable.
Current consumption 130mA at 1.5V 

Reviews

There are no reviews for this product yet.  Be the first to write a review.

Q and A




AMT Wi5 - Posted by: Ellis on 7/22/2011
Do you know if there is a thrid valve slide clip attachement that exists and can be used with it instead of just the clip for the bell? Thank you
RE: AMT Wi5 - Posted by: Dana Daniel on 7/22/2011
Hello. As i do not understand the "third valve" question, here is a link to the site. They make variants for many brass instruments. http://www.appliedmicrophone.com/products/show/55 Perhaps this will help, or please give us a call and we will contact the factory for your special needs. Thank you.

AMT Belt Pack Free Mic - Posted by: Dave KC on 10/24/2010
Several questions: How much does it weigh? How hard is it to switch to another instrument (Say, moving from one trumpet to another between tunes)? Does it need a pre-amp? Is that icluded in the price? Thanks...
RE: AMT Belt Pack Free Mic - Posted by: Mike Tipton on 10/25/2010
The universal clip allows this microphone to be switched to another instrument in a matter of seconds. It is considered a feather-weight design and only weighs a few ounces. This unit does not require any type of pre-amplification.

Find All AMT Items
Low Price Guarantee
Apply for Financing Installation
Suggested Retail   $949.00
Our Low Price   $759.00
Your Savings   $190.00

Share on Facebook Share on Twitter email this Print This