Community Stadium/Field Speaker!
Be heard! The R.25-94Z is a two-way, full-range loudspeaker system designed to provide high-quality voice and music reproduction in applications requiring extreme weather resistance.
It is designed to withstand long-term exposure to tough environmental conditions and provide performance normally associated only with indoor loudspeakers. You will find Community R Series speakers in some of the most well-known and most demanding stadiums around the country.
The R.25-94Z has an 8-inch (203mm) cone LF driver and a ¾-inch (20 mm) exit HF compression driver with a weather-resistant diaphragm. The HF driver is coupled to a nominal 90° x 40° horn, which guarantees the quality and coverage of your broadcast that you expect. The HF assembly is coaxially mounted with the LF driver.
The enclosure and HF horn are molded of UV resistant gray polyethylene, and all exposed hardware is stainless steel.
The Weather-Stop™ grille assembly, retained by stainless steel screws to the front of the enclosure, consists of three layers so that you can be confident installing Community's R Series speaker.
Loudspeaker Type: Two-way, horn loaded, coaxial, weather-resistant
Operating Range: 100 Hz to 16 kHz
160 Hz to 12.5 kHz (±3 dB)
Max Input Ratings: 200W continuous, 500W program
40 volts RMS, 89 volts momentary peak
Power Amplifier: 420W to 600W @ 8 ohms
Sensitivity (1W/1m): 97 dB SPL (160 Hz to 10 kHz 1/3 octave bands)
97 dB SPL (250 Hz to 4 kHz speech range)
Maximum Output: 120 dB SPL / 127 dB SPL (peak)
Nominal Impedance: 8 ohms
Impedance: 4.6 ohms @ 10.4 kHz
90°H (+7° / -13°, 2 kHz to 10 kHz)
40°V (+35° / -10°, 2 kHz to 10 kHz)
Axial Q / DI: 13.5 / 11.3, 2 kHz to 10 kHz
Frequency: 2 kHz
Signal Processing: 100 Hz high pass filter
Drivers: LF (1) 8” cast frame, Cool-Coil™
HF (1) 3/4” exit, titanium free, Ferrofluid-cooled
Driver Protection: DYNA-TECH protection circuitry
Input Connection: 16-2 SJOW (12 ft /4 m)
Enclosure: Rotomolded HDPE, light gray color
Enclosure Hardware: None
(5) rigging points (M8 hardware)
1-3/8” pole mount socket
Grille: 16-gauge perforated stainless steel, 3-layer
Accessories: 24 dB/Oct high pass filter
Accessories: (1) Stainless steel (304) yoke bracket
Accessories: Pole mount system
11.3 inches / 287 mm
11.3 inches / 287 mm
13.3 inches / 338 mm
Weight: 20 lbs / 9.1 kg
Shipping Weight: 23.5 lbs / 10.7 kg