Audio Technica - ATW-R3100D

• Automatic frequency scanning
• 200 PLL-synthesized channels per band selectable via soft-touch controls on receiver and transmitter
• True Diversity operation selects the better signal from two independent receiver sections, reducing dropouts
• Interference-resistant UHF band operation
• Advanced digital ToneLock™ squelch
• Red alert light that warns of low battery power, signal loss and input overload
• Transmitter battery-life fuel gauge on the receiver
• Ground-lift switch
• Balanced and unbalanced audio output jacks
• Two receivers can be mounted side-by-side in a single 19" rack space

Specifications

• Operating Frequencies: UHF band 655.500 MHz to 680.375 MHz
• Number of Channels: 200 total per band
• Frequency Stability: +/-0.005%, Phase Lock Loop frequency control
• Modulation Mode: FM
• Normal Deviation: +/-10 kHz
• Operating Range: 300' typical
• Frequency Response: 70 Hz to 15 kHz
• Receiving System: Dual independent receivers, automatic-switching diversity
• Image Rejection: 60 dB nominal, 55 dB minimum
• Signal-to-Noise Ratio: 110 dB at 35 kHz deviation (IEC-weighted), maximum modulation 75 kHz
• Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz)
• Sensitivity: 14 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted)
• Intermediate Frequency: 243.950 MHz, 10.7 MHz
• Audio Output: Unbalanced: 50 mV (at 1 kHz, +/-5kHz deviation, 10k ohm load); Balanced: 32 mV (at 1 kHz, +/-5 kHz deviation, 10k ohm load)
• Output Connectors: Unbalanced: 1/4" TS ("mono") phone jack; Balanced: XLRM-type
• Power Supply: 120V AC 60 Hz, or 12-18V DC, 500 mA, center positive, with external supply
• Dimensions (W x H x D): 8.27" x 1.93" x 7.20"
• Weight: 2.4 lbs
• Accessories Included: AD1205AA 120V 60 Hz in-line AC adapter; two flexible UHF antennas; rack-mount adapters