Audio Technica - ATW-R3100C

• Automatic frequency scanning
• 200 PLL-synthesized channels per band selectable via soft-touch controls on receiver and transmitter
• True Diversity operation selects the better signal from two independent receiver sections, reducing dropouts
• Interference-resistant UHF band operation
• Advanced digital Tone Lock squelch
• Red alert light that warns of low battery power, signal loss and input overload
• Transmitter battery-life fuel gauge on the receiver
• Ground-lift switch
• Balanced and unbalanced audio output jacks
• Two receivers can be mounted side-by-side in a single 19" rack space

3000 Series Overall System Specifications

• Operating Frequencies: UHF Band C: 541.500 MHz to 566.375 MHz (TV 25-30)
• Number of Channels 200 total per band
• Frequency Stability: +/-0.005%, Phase Lock Loop frequency control
• Modulation Mode: FM
• Normal Deviation: +/-10kHz
• Operating Range: 300' typical
• Operating Temperature Range: 41° F (5° C) to 113° F (45° C)
• Frequency Response: 70Hz to 15kHz

Receiver Specifications

• Receiving System: Dual independent receivers, automatic-switching diversity
• Image Rejection: 60dB nominal, 55dB minimum
• Signal-to-Noise Ratio: 110 dB at 35 kHz deviation (IEC-weighted), maximum modulation 75 kHz
• Total Harmonic Distortion: <=1% (10kHz deviation at 1kHz)
• Sensitivity: 24 dBµV (S/N 60 dB at 5kHz deviation, IEC-weighted)
• Intermediate Frequency: 243.950 MHz, 10.7 MHz
• Audio Output
  Unbalanced: 50mV (at 1kHz, +/-5kHz deviation, 10k ohm load)
  Balanced: 32mV (at 1kHz, +/-5kHz deviation, 10k ohm load)
• Output Connectors
  Unbalanced: 1/4" TS ("mono") phone jack
  Balanced: XLRM-type
• Power Supply: 120V AC 60 Hz, or 12-18V DC, 500 mA, center positive, with external supply
• Dimensions (W x H x D): 8.27" x 1.93" x 7.20"
• Weight: 2.4 lbs
• Accessories Included: Rack-mount adapters