Audio Technica AT2010 Audio-Technica Handheld Condenser Microphone

Description/Specs

The AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica’s renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.

Extended frequency response and superior transient response for smooth, natural sonic characteristics

High SPL-handling and wide dynamic range provide unmatched versatility

Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity

Corrosion-resistant contacts from gold-plated XLRM-type connector

Rugged, all-metal and construction for years of trouble-free service

Quiet-Flex™ stand clamp provides silent, flexible microphone positioning

ELEMENT	Fixed-charge back plate permanently polarized condenser
POLAR PATTERN	Cardioid
FREQUENCY RESPONSE	40-20,000 Hz
OPEN CIRCUIT SENSITIVITY	–48 dB (3.9 mV) re 1V at 1 Pa
IMPEDANCE	100 ohms
MAXIMUM INPUT SOUND LEVEL	136 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	113 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	71 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	48V DC, 2 mA typical
WEIGHT	233 g (8.2 oz)
DIMENSIONS	179.1 mm (7.05") long, 50.8 mm (2.00") maximum body diameter
OUTPUT CONNECTOR	Integral 3-pin XLRM-type
ACCESSORIES FURNISHED	AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
AUDIO-TECHNICA CASE STYLE	T7