EV - ZX1-90

The Electro-Voice® ZX1 is the new standard of no compromise audio performance and versatility for compact sound reinforcement.

The high-tech enclosure uses injection-molded high-impact polypropylene to make the ZX1 extremely durable. The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low frequency response without vent noise.

The ZX1’s long excursion, high output 8" woofer with a weatherized treated cone delivers smooth low frequency performance with exceptional reliability. A sophisticated crossover network integrates it with the DH2005, a 1-inch voice coil true compression driver maximum output with extended frequency response. Full-bandwidth overload protection is provided for reliable, long term operation without audible effect.

The horn features 90° x 50° coverage with the important added benefit of rotation, allowing the ZX1 to be oriented either horizontally or vertically for the ultimate in coverage flexibility.

The ZX1’s molded polymer enclosure is inherently water resistant. The enclosure features an integrated pole mount, a pocket handle, and a wedge-angle design allowing for use as a stage monitor.

Key Features:

• Extremely Smooth, Wide Frequency Response
• Attractive, Clean Design with Full Grille
• EV8L 8in. High-Output LF Transducer
• DH2005 1in. Exit True Compression Driver
• 90° x 50° Coverage Pattern
• Rotatable Horn Design
• Integral Monitor Angle on Enclosure
• 200W Cont., 800W Peak Power Handling
• High Sensitivity, 123 dB Maximum SPL
• Built-In Pole Mount
• Integral Handle Pocket for Easy Carrying

Specifications:

• Freq. Response (-3dB): 60Hz-20kHz
• Freq. Range (-10dB): 48Hz-20kHz
• Rec. HiPass Frequency: 40Hz
• Axial Sensitivity: 94dB (1W/1m)
• Max Calculated SPL: 123 dB
• Horizontal Coverage: 90° or 50°
• Vertical Coverage: 50° or 90°
• Rated System Power: 200W Cont., 400W Prog., 800W Peak
• LF Transducer: EV8L, 8in. (203mm) Driver
• HF Transducer: DH2005, 1in. (25.44mm) Exit Compression Driver
• Crossover Frequency: 1.7kHz
• Nominal Impedance: 8 Ohms
• Minimum Impedance: 6 Ohms
• Connectors: Neutrik Speakon NL4
• Enclosure Material: High Impact Polymer
• Grille: Polysester Powder-coated, 18GA Galvanized Steel
• Dimensions: 457mm x 282mm x 264mm
  17.98in. x 11.12in. x 10.38in.