BEHRINGER - EUROLIVE B208D Active 200-Watt 2-Way PA Speaker System with 8" Woofer and 1.35" Compression Driver
Description/Specs
Finally,
Great-Sounding Active Loudspeakers That Won’t Break Your Back or Bank
Account!
Thanks to our revolutionary Class-D amplifier technology and internal
switch-mode power supplies, EUROLIVE D Series loudspeakers provide a
much better power-to-weight ratio than competing active speakers. Put
simply, you get all the power without the back-breaking weight. And the
sound quality of these lightweight loudspeakers exceeds that of our
extremely popular EUROLIVE B212A and B215A systems — plus we've included
two 200-Watt models, the B210D (10") and B208D (8") for less demanding
applications.
Due to their high-efficiency design, they crank out 550/200 of the
cleanest, punchiest audio Watts you've ever heard from a compact
loudspeaker system. The integrated sound processor provides total system
control, along with dependable protection of the LF and HF transducers,
thanks to the built-in active high-pass filter, which virtually
eliminate distortion — even at extreme operating levels. In addition,
all four models feature an Ultra-Low Noise (ULN) Mic/Line input with
LEVEL control and a dedicated 2-band EQ (bass/treble) for easy control.
Intelligent by Design
One of the coolest things about active loudspeakers is the lack of
back-breaking racks of amps, crossovers and EQs that are often required
to make passive speaker systems sound almost as good. But that comes
with a trade-off — that extra weight is transferred to the loudspeaker,
making it difficult for a single user to heave all that mass onto the
top of a speaker stand.
BEHRINGER's D Series' "Intelligent-Design" merges the best features of
active loudspeakers with significantly lower weight by using switch-mode
power supplies and Class-D amplifier topology.
Hidden deep inside each enclosure is the equivalent of an active 2-way
electronic crossover, graphic EQ, parametric EQ, mic preamp, limiter and
two Class-D power amplifiers, yet overall weight is less than
comparable loudspeaker systems! These components work together
seamlessly to provide optimum sound quality — and it all takes place
automatically, without you having to touch a single knob.
Class D Amplifier Technology Delivers High Power With Low Weight.
Instead of operating relatively continuously like Class AB circuits,
Class D amps switch on and off thousands of times per second, delivering
power only when needed. In other words, the amplifier is either fully
on or fully off , which significantly reduces the power losses in the
output devices. This is easy in theory and complex in practice, which is
why there are so many different Class D designs. Without boring you
with terms like PWM Generation and Gate Drivers, let's just say that to
realize the benefits of a Class D design requires compensating for a lot
of potential problems that can cause audible distortion. BEHRINGER
didn't invent Class D technology, but our R&D Department has been
working for years to perfect our own version with all the benefits of
reduced weight and cool running, and none of the drawbacks. That's why
we invested over a solid year of research time eliminating pitfalls like
quantizing errors and excess dead time, selecting just the right
switching frequency (and other equally tech-y terms). And why we spent
an equally long time testing individual components to ensure they will
stand up to the rigors of the real world.
When combined with switching-mode power supplies that replace heavy
toroid transformers, our new designs provide more dynamic punch since
the higher switching frequency reloads the supply's capacitors much
faster. And, because they are so much more effidcient, the D Series runs
cooler and doesn't require huge, heavy heat sinks. The resulting
speakers systems are much lighter, making them easy to transport and set
up. Our no-compromise design means your D Series active loudspeakers
will deliver full power and incredible fidelity all night long, with no
need for rest cycles.
Instant PA System
With just a single D Series loudspeaker system and a microphone or MP3
player, you can set up an instant sound system. Thanks to the built-in
preamp section, you just connect a dynamic mic and raise and lower the
volume with the Level control. Plug in your sound source, place the
speaker on a tabletop or stand, and power up. It's just that easy. And
if you need more coverage, simply use the convenient LINK OUTPUT XLR
connector to add more active loudspeakers.
Stereo Music System
You can even use two D Series enclosures for stereo playback of your
MP3, CD or old-skool cassette deck without any additional hardware. Just
plug the appropriate stereo "breakout" adapter into your deck's output
jack and run the cables to the 1/4" inputs on each loudspeaker. Set the
Level and EQ controls the same on both enclosures. Voilà, instant party!
Marvelous Monitoring
Thanks to their trapezoidal design, these cabinets can be laid on their
side providing the ideal angle for onstage monitor wedge applications.
Hookup is simple, requiring only a single XLR or 1/4" cable from the
monitor send on your mixing console and, of course, power. Additional
monitors can be chained together via the XLR LINK OUTPUT jack on the
rear panel.
Custom-Designed Transducers
Let's face it; the transducers (woofers and tweeters) are the only part
of a sound system you actually hear, so we don't cut any corners. While
some of our competitors are content to buy off-the-shelf transducers and
plug them into their boxes, we custom-design and build our transducers
from scratch. Not only do we wind our own voice coils, we process the
paper pulp into cones and even machine our own backplates. This enables
us to control the quality, and frankly, make better components, like the
long-excursion LF transducers and state-ofthe- art 1.35" compression
drivers we deploy in each and every EUROLIVE enclosure.
Low Frequency Response
The EUROLIVE D Series was built with extended low frequency handling in
mind. With a tuned port, internally braced, injection molded enclosure,
each model's custom designed LF transducer (woofer) really cranks out
tight low end. Keep in mind that bass response varies according to LF
transducer size, so the larger the speaker, the more bass you will be
able to generate.
Accurate Non-Fatiguing Midrange and Treble
Even if your particular application doesn't include booming bass, you'll
love the sheer accuracy of these loudspeakers. Over a year of design
went into a exponential horn/aluminum dome compression driver
combination that could do justice to loud hard rock or dance music — yet
could also satisfy audiophiles with its musical timbre and attention to
detail. For spoken word, singing or acoustical instruments, they are
un-matched for being able to articulate complex harmonic details. In
fact, many customers think it's the most natural-sounding speaker
they've ever heard at anywhere near the price.
Processor Controlled Output
Dynamic processing is one of the best ways to maximize output without
sacrificing sound quality. The D Series' built-in circuitry
automatically adjusts program content, allowing the loudspeaker to
operate at extreme levels. It accomplishes this by reducing bass output
slightly as you approach the limit of the transducers. This frees up LF
amp and transducer resources, so that higher overall volume can be
realized. It's like having a tiny soundman inside each cabinet
constantly monitoring and changing output parameters. By making subtle
changes to the crossover frequency and the audio content, the system is
able to crank out more sound — without the slightest hint of distortion.
Massive Power to Size Ratio
Cutting-edge technology and high-fidelity speakers are not all it takes
to get your message across — you need power, and lots of it. At the
heart of each EUROLIVE D Series loudspeaker are two high-current
amplifiers with a total output of 550-Watts for the B212D/B215D and
200-Watts for the B210D/B208D. They're capable of driving the speakers
to their maximum with no distortion — and without speaker damage, thanks
to active internal protection circuits. Put simply, they will astound
you with their massive punch, smooth mids and articulate top-end!
Which Speaker Do I Need?
As you've probably noticed, we make these active loudspeakers in four
different woofer sizes. Which one is right for you?
Well, let's start with your application. Is it spoken word in a hotel
ballroom? Hard rock in a park? A folk singer or a drum 'n' bass DJ? Loud
enough for an 18-year old or loud enough for your grandmother? A huge
auditorium or a tiny club? Physics are physics and a 15" low frequency
transducer has almost 40% more surface area with which to move air than a
12". A 12" has 30% more area than a 10", and a 10" has 35% more than an
8". So the easiest answer is "Whether to choose one speaker cabinet
over another depends on your bass requirements." If you're addressing a
small meeting, or demoing the latest "slice-o-chop-o-vegamatic" at the
swap meet or county fair, the B208D might be all the speaker you'll
need. But if you're providing disco to the masses at a standing room
only nightclub — or you just need to crank it up louder, then the B215D
may be a better choice.
As you can see, "Bass requirements" isn't quite as easy an answer as it
sounds. The larger a room's cubic volume, the more energy is required to
achieve a given level of bass. In other words, when playing the same
tune in a big room versus a small room, big room = less bass; small room
= more bass. Confused yet? We suggest that you consult your BEHRINGER
dealer for more advice on this subject, which is also a good time to do a
listening test —against their competition and against each other. Judge
for yourself. And then own BEHRINGER with money to spare.
Inputs
Callouts
Finally,
Great-Sounding Active Loudspeakers That Won’t Break Your Back or Bank
Account!
Thanks to our revolutionary Class-D amplifier technology and internal
switch-mode power supplies, EUROLIVE D Series loudspeakers provide a
much better power-to-weight ratio than competing active speakers. Put
simply, you get all the power without the back-breaking weight. And the
sound quality of these lightweight loudspeakers exceeds that of our
extremely popular EUROLIVE B212A and B215A systems — plus we've included
two 200-Watt models, the B210D (10") and B208D (8") for less demanding
applications.
Due to their high-efficiency design, they crank out 550/200 of the
cleanest, punchiest audio Watts you've ever heard from a compact
loudspeaker system. The integrated sound processor provides total system
control, along with dependable protection of the LF and HF transducers,
thanks to the built-in active high-pass filter, which virtually
eliminate distortion — even at extreme operating levels. In addition,
all four models feature an Ultra-Low Noise (ULN) Mic/Line input with
LEVEL control and a dedicated 2-band EQ (bass/treble) for easy control.
Intelligent by Design
One of the coolest things about active loudspeakers is the lack of
back-breaking racks of amps, crossovers and EQs that are often required
to make passive speaker systems sound almost as good. But that comes
with a trade-off — that extra weight is transferred to the loudspeaker,
making it difficult for a single user to heave all that mass onto the
top of a speaker stand.
BEHRINGER's D Series' "Intelligent-Design" merges the best features of
active loudspeakers with significantly lower weight by using switch-mode
power supplies and Class-D amplifier topology.
Hidden deep inside each enclosure is the equivalent of an active 2-way
electronic crossover, graphic EQ, parametric EQ, mic preamp, limiter and
two Class-D power amplifiers, yet overall weight is less than
comparable loudspeaker systems! These components work together
seamlessly to provide optimum sound quality — and it all takes place
automatically, without you having to touch a single knob.
Class D Amplifier Technology Delivers High Power With Low Weight.
Instead of operating relatively continuously like Class AB circuits,
Class D amps switch on and off thousands of times per second, delivering
power only when needed. In other words, the amplifier is either fully
on or fully off , which significantly reduces the power losses in the
output devices. This is easy in theory and complex in practice, which is
why there are so many different Class D designs. Without boring you
with terms like PWM Generation and Gate Drivers, let's just say that to
realize the benefits of a Class D design requires compensating for a lot
of potential problems that can cause audible distortion. BEHRINGER
didn't invent Class D technology, but our R&D Department has been
working for years to perfect our own version with all the benefits of
reduced weight and cool running, and none of the drawbacks. That's why
we invested over a solid year of research time eliminating pitfalls like
quantizing errors and excess dead time, selecting just the right
switching frequency (and other equally tech-y terms). And why we spent
an equally long time testing individual components to ensure they will
stand up to the rigors of the real world.
When combined with switching-mode power supplies that replace heavy
toroid transformers, our new designs provide more dynamic punch since
the higher switching frequency reloads the supply's capacitors much
faster. And, because they are so much more effidcient, the D Series runs
cooler and doesn't require huge, heavy heat sinks. The resulting
speakers systems are much lighter, making them easy to transport and set
up. Our no-compromise design means your D Series active loudspeakers
will deliver full power and incredible fidelity all night long, with no
need for rest cycles.
Instant PA System
With just a single D Series loudspeaker system and a microphone or MP3
player, you can set up an instant sound system. Thanks to the built-in
preamp section, you just connect a dynamic mic and raise and lower the
volume with the Level control. Plug in your sound source, place the
speaker on a tabletop or stand, and power up. It's just that easy. And
if you need more coverage, simply use the convenient LINK OUTPUT XLR
connector to add more active loudspeakers.
Stereo Music System
You can even use two D Series enclosures for stereo playback of your
MP3, CD or old-skool cassette deck without any additional hardware. Just
plug the appropriate stereo "breakout" adapter into your deck's output
jack and run the cables to the 1/4" inputs on each loudspeaker. Set the
Level and EQ controls the same on both enclosures. Voilà, instant party!
Marvelous Monitoring
Thanks to their trapezoidal design, these cabinets can be laid on their
side providing the ideal angle for onstage monitor wedge applications.
Hookup is simple, requiring only a single XLR or 1/4" cable from the
monitor send on your mixing console and, of course, power. Additional
monitors can be chained together via the XLR LINK OUTPUT jack on the
rear panel.
Custom-Designed Transducers
Let's face it; the transducers (woofers and tweeters) are the only part
of a sound system you actually hear, so we don't cut any corners. While
some of our competitors are content to buy off-the-shelf transducers and
plug them into their boxes, we custom-design and build our transducers
from scratch. Not only do we wind our own voice coils, we process the
paper pulp into cones and even machine our own backplates. This enables
us to control the quality, and frankly, make better components, like the
long-excursion LF transducers and state-ofthe- art 1.35" compression
drivers we deploy in each and every EUROLIVE enclosure.
Low Frequency Response
The EUROLIVE D Series was built with extended low frequency handling in
mind. With a tuned port, internally braced, injection molded enclosure,
each model's custom designed LF transducer (woofer) really cranks out
tight low end. Keep in mind that bass response varies according to LF
transducer size, so the larger the speaker, the more bass you will be
able to generate.
Accurate Non-Fatiguing Midrange and Treble
Even if your particular application doesn't include booming bass, you'll
love the sheer accuracy of these loudspeakers. Over a year of design
went into a exponential horn/aluminum dome compression driver
combination that could do justice to loud hard rock or dance music — yet
could also satisfy audiophiles with its musical timbre and attention to
detail. For spoken word, singing or acoustical instruments, they are
un-matched for being able to articulate complex harmonic details. In
fact, many customers think it's the most natural-sounding speaker
they've ever heard at anywhere near the price.
Processor Controlled Output
Dynamic processing is one of the best ways to maximize output without
sacrificing sound quality. The D Series' built-in circuitry
automatically adjusts program content, allowing the loudspeaker to
operate at extreme levels. It accomplishes this by reducing bass output
slightly as you approach the limit of the transducers. This frees up LF
amp and transducer resources, so that higher overall volume can be
realized. It's like having a tiny soundman inside each cabinet
constantly monitoring and changing output parameters. By making subtle
changes to the crossover frequency and the audio content, the system is
able to crank out more sound — without the slightest hint of distortion.
Massive Power to Size Ratio
Cutting-edge technology and high-fidelity speakers are not all it takes
to get your message across — you need power, and lots of it. At the
heart of each EUROLIVE D Series loudspeaker are two high-current
amplifiers with a total output of 550-Watts for the B212D/B215D and
200-Watts for the B210D/B208D. They're capable of driving the speakers
to their maximum with no distortion — and without speaker damage, thanks
to active internal protection circuits. Put simply, they will astound
you with their massive punch, smooth mids and articulate top-end!
Which Speaker Do I Need?
As you've probably noticed, we make these active loudspeakers in four
different woofer sizes. Which one is right for you?
Well, let's start with your application. Is it spoken word in a hotel
ballroom? Hard rock in a park? A folk singer or a drum 'n' bass DJ? Loud
enough for an 18-year old or loud enough for your grandmother? A huge
auditorium or a tiny club? Physics are physics and a 15" low frequency
transducer has almost 40% more surface area with which to move air than a
12". A 12" has 30% more area than a 10", and a 10" has 35% more than an
8". So the easiest answer is "Whether to choose one speaker cabinet
over another depends on your bass requirements." If you're addressing a
small meeting, or demoing the latest "slice-o-chop-o-vegamatic" at the
swap meet or county fair, the B208D might be all the speaker you'll
need. But if you're providing disco to the masses at a standing room
only nightclub — or you just need to crank it up louder, then the B215D
may be a better choice.
As you can see, "Bass requirements" isn't quite as easy an answer as it
sounds. The larger a room's cubic volume, the more energy is required to
achieve a given level of bass. In other words, when playing the same
tune in a big room versus a small room, big room = less bass; small room
= more bass. Confused yet? We suggest that you consult your BEHRINGER
dealer for more advice on this subject, which is also a good time to do a
listening test —against their competition and against each other. Judge
for yourself. And then own BEHRINGER with money to spare.
Accessory Successfully Added to Cart
Pricing and Availability are subject to change.
