Shure PG58-XLR PG58 Vocal Mic with FREE XLR Cable

Description/Specs

Tailored frequency response is smooth and extended. Tuned specifically for vocal applications.

Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.

Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.

Cartridge includes a neodymium magnet for high output level.

Durable metal construction.

On/off switch for onstage control.

Steel mesh ball grille with integral "pop" filter reduces explosive breath sounds and wind noise.

Includes FREE 15ft. XLR microphone cable, break-resistant mic clip and storage bag.

Microphone Type: Dynamic (moving coil)
Frequency Response: 60 to 15,000 Hz
Polar Pattern: Cardioid
Output Impedance: EIA rated at 150 ohms (300 ohms actual)
Sensitivity at 1 kHz, open circuit voltage, 2.2 mV,1 Pascal=94 dB SPL
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Net Weight: 321 g (0.71 lb)
Connector: Three-pin professional audio (XLR), male
Operating Temperature: -29 deg to 57 deg C (-20 deg to 135 deg F)
Relative Humidity: 0 to 95%

Reviews

There are no reviews for this product yet. Be the first to write a review.

Q and A

There are no posts for this product. Be the first to post a question.

Shure - PG58-XLR

Shure PG58 Vocal Mic with FREE XLR Cable

Description/Specs

Reviews

Q and A