Shure MX202B/C In-Line Choir Microphone (Black)

Description/Specs

It is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. MX202 Microflex® Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck. Cardioid mic comes w/ 30' mic cable, in-line preamp, stand adapter.

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal polar pattern choice for each application
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
White or black finish that blends unobtrusively with most surroundings
Preamp options available offer easy installation in ceilings or microphone stands
When combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with minimum RF interference or electromagnetic hum

Frequency Response: 50 to 17,000 Hz
Output Impedance: 180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV); Supercardioid: -33.5 dBV/Pa (21.1 mV); Omnidirectional: -27.5 dBV/Pa (42.2 mV); All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k ohm load): Cardioid: 124.2 dB; Supercardioid: 122.7 dB; Omnidirectional: 116.7 dB; All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL; Supercardioid: 26.5 dB SPL; Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB; Supercardioid: 67.5 dB; Omnidirectional: 73.5 dB
Dynamic Range at 1 k ohm load: 96.2 dB; 100 dB at 0 gain
Common Mode Rejection: 45.0 dB minimum
Preamplifier Output Clipping Level (1% THD): -6.0 dBV (0.5 V); -12 dBV at 0 gain
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA