Leviton NSI - 2408CD

Description/Specs

Commercial grade NSI 2408 boasts 2400 watts per channel on each of 8 channels, and is available in 2 versions.

The 2408CD is a dimmer version for filament-type lighting, the 2408CR is a relay (on-off) configuration that supports fluorescent, HTI, and other gas-type lamps that cannot be dimmed.

Unit connects to any standard NSI stage controller or remote control like the 400CP. Operates on a 120/240 volt line. Handles a 19,200 watt maximum load with protection from 8 fully magnetic 20 amp breakers. Pressure screw terminals for hard wire inputs/outputs.

• 8 Individual Dimmer/Relay Channels
• DMX / Microplex Compatible
  
• 2,400 Watts per Channel,19,200 Watts Maximum
• Dual SCR Circuit Design
• Toroidal filtering reduces audio interference and extends lamp life
• Microprocessor Controlled
• 8 Fully Magnetic Circuit Breakers
• 120/240 Volt Operation
• 512 Channel Address Capable
• Channel Address Select Switch
• Luma-Net Architectural Control Capable

Features
• 4 or 8 individual dimmer channels
• 2400 watts per channel19,200 watt maximum (8 dimmer version)
- 19,200 watt maximum (8 dimmer version)
- 9,600 watt maximum (4 dimmer version)
• Microprocessor controlled
• 8 fully magnetic circuit breakers
• 120/240 volt operation
• Dual SCR circuit design
• Toroidal choke filtering for each channel
• 400 micro-second rise time
• 512 channel program capability
• Channel address select switch
• Soft start operating mode reduces thermal shock and buffers inrush current to extend lamp life
• Extruded aluminum passive heat dispersion
• NSI Micro-Plex, DMX512 and 0-10 volt analog inputs
• Luma-Net® architectural control system capable
• Pressure screw terminals for hardwire
inputs/outputs
• Test switch for dimmer or load testing
• Remote operation with Luma-Net® control panels
• Individual channels may be converted to
non-dim relays
• Steel chassis construction, wall mountable
• Power LED
• Channel status indicator LED
• Signal status LED

Control Input Terminals
• NSI Micro-Plex
• DMX512
• 0-10 volt analog inputs
• Luma-Net

Power Feed
• 80A 120/240 or 120/208Y VAC, 3-wire service
plus ground
• #4 AWG THWN or equivalent copper wire rated
for at least 75°C

Mounting & Ventilation
• Minimum 36” from top to ceiling
• Minimum 12” from top to other equipment
• Minimum 12” from side to wall
• Minimum 6” from side to other equipment
• If multiple units installed in a small space, ambient air temperature should not exceed 100°F

Downloads

Owners Manual Specification Sheet

Reviews

Q and A

NSI CD Dimmers - Posted by: Robert Sheffield on 5/14/2012 One Circuit of Lights will blink on and off RE: NSI CD Dimmers - Posted by: Dana Daniel on 5/14/2012 Hello. There are several things that might make your 2408 do that. Many are far to lengthy to inquire about in this small box. Would you please give Dana a call at 800-925-5776 so I may ask a few questions? Thank you.